Instructions

Chapter 2 Command Systems for GPSA and RTSA Modes RIGOL
RSA3000E Programming Guide 2-185
:SYSTem:BEEPer:STATe
Syntax
:SYSTem:BEEPer:STATe OFF|ON|0|1
:SYSTem:BEEPer:STATe?
Description
Turns on or off the beeper.
Queries the status of the beeper.
Parameter
Name
Type
Range
Default
——
Bool
OFF|ON|0|1
OFF|0
Return Format
The query returns 0 or 1.
Example
The following command turns on the beeper.
:SYSTem:BEEPer:STATe ON or :SYSTem:BEEPer:STATe 1
The following query returns 1.
:SYSTem:BEEPer:STATe?
:SYSTem:COMMunicate:LAN[:SELF]:APPLy
Syntax
:SYSTem:COMMunicate:LAN[:SELF]:APPLy
Description
Applies the LAN interface parameter settings.
:SYSTem:COMMunicate:LAN[:SELF]:AUToip:STATe
Syntax
:SYSTem:COMMunicate:LAN[:SELF]:AUToip:STATe OFF|ON|0|1
:SYSTem:COMMunicate:LAN[:SELF]:AUToip:STATe?
Description
Enables or disables the auto IP setting mode.
Queries the status of the auto IP setting mode.
Parameter
Name
Type
Range
Default
——
Bool
OFF|ON|0|1
OFF|0
Remarks
The analyzer attempts to acquire the IP address configuration according to the sequence of DHCP, Auto IP,
and Manual IP. These three modes cannot be disabled at the same time.
ON|1: enables the auto IP mode.
OFF|0: disables the auto IP mode and selects DHCP configuration mode.