Instructions

RIGOL Chapter 2 Command Systems for GPSA and RTSA Modes
2-156 RSA3000E Programming Guide
[:SENSe]:MCHPower:FREQuency:SPAN
Syntax
[:SENSe]:MCHPower:FREQuency:SPAN <freq>
[:SENSe]:MCHPower:FREQuency:SPAN?
Description
Sets the channel span of the multi-channel power measurement.
Queries the channel span of the multi-channel power measurement.
Parameter
Name
Type
Range
Default
<freq> Consecutive Real Number
10 Hz to 2*Min[(CF - start frequency),
(stop frequency - CF)]
3 GHz
Remarks
This command is only valid when the multi-channel power measurement is enabled in GPSA mode．
Return Format
The query returns the channel span in scientific notation. Its unit is Hz.
Example
The following command sets the channel span to 1 MHz.
:SENSe:MCHPower:FREQuency:SPAN 1000000
The following query returns 1.000000000e+06.
:SENSe:MCHPower:FREQuency:SPAN?
[:SENSe]:MCHPower:SHEet
Syntax
[:SENSe]:MCHPower:SHEet OFF|ON|0|1
[:SENSe]:MCHPower:SHEet?
Description
Opens or closes the channel editing table.
Queries the status of the channel editing table.
Parameter
Name
Type
Range
Default
--
Bool
OFF|ON|0|1
OFF|0
Remarks
This command is only valid when the multi-channel power measurement is enabled in GPSA mode．
Return Format
The query returns 0 or 1.
Example
The following command enables the channel editing table.
:SENSe:MCHPower:SHEet ON or :SENSe:MCHPower:SHEet 1
The following query returns 1.
:SENSe:MCHPower:SHEet?