Instructions

RIGOL Chapter 2 Command Systems for GPSA and RTSA Modes
2-126 RSA3000E Programming Guide
Example
The following command enables the auto setting mode of V/R ratio.
:SENSe:BANDwidth:VIDeo:AUTO ON or :SENSe:BANDwidth:VIDeo:AUTO 1
:SENSe:BWIDth:VIDeo:AUTO ON or :SENSe:BWIDth:VIDeo:AUTO 1
The following query returns 1.
:SENSe:BANDwidth:VIDeo:AUTO?
:SENSe:BWIDth:VIDeo:AUTO?
[:SENSe]:CNRatio:AVERage:COUNt
Syntax
[:SENSe]:CNRatio:AVERage:COUNt <integer>
[:SENSe]:CNRatio:AVERage:COUNt?
Description
Sets the average count of the C/N ratio measurement.
Queries the average count of the C/N ratio measurement.
Parameter
Name
Type
Range
Default
<integer>
Integer
1 to 1,000
10
Remarks
This command is only valid when the C/N ratio measurement in GPSA mode is enabled.
Return Format
The query returns the average count in integer.
Example
The following command sets the average count to 100.
:SENSe:CNRatio:AVERage:COUNt 100
The following query returns 100.
:SENSe:CNRatio:AVERage:COUNt?
[:SENSe]:CNRatio:AVERage[:STATe]
Syntax
[:SENSe]:CNRatio:AVERage[:STATe] OFF|ON|0|1
[:SENSe]:CNRatio:AVERage[:STATe]?
Description
Enables or disables the average measurement function of the C/N ratio measurement.
Queries the status of the average measurement function of the C/N ratio measurement.
Parameter
Name
Type
Range
Default
——
Bool
OFF|ON|0|1
OFF|0