Instructions

Chapter 2 Command Systems for GPSA and RTSA Modes RIGOL
RSA3000E Programming Guide 2-91
:MMEMory:LOAD:CORRection
Syntax
:MMEMory:LOAD:CORRection 1|2|3|4,<file_name>
Description
Loads the data from the specified file (suffixed with .csv) to carry out amplitude correction.
Parameter
Name
Type
Range
Default
--
Discrete
1|2|3|4
--
<file_name>
ASCII String
--
--
Remarks
The parameter 1|2|3|4 corresponds to ANTenna|CABLe|OTHer|USER.
This operation fails if the file with the specified filename does not exist.
This command is only available for GPSA mode.
Example
The following command loads the amplitude correction file ANT.csv to the instrument.
:MMEMory:LOAD:CORRection 1,ANT.csv
:MMEMory:LOAD:FMT
Syntax
:MMEMory:LOAD:FMT <label>,<file_name>
Description
Loads the edited FMT file (.csv).
Parameter
Name
Type
Range
Default
<label>
Keyword
UPPer|LOWer
——
<file_name>
ASCII String
—— ——
Remarks
This operation fails if the specified file does not exist.
This command is only available for RTSA mode.
Example
The following command loads the FMT file (mask1.csv) to the upper mask.
:MMEMory:LOAD:FMT upper,mask1.csv
:MMEMory:LOAD:LIMit
Syntax
:MMEMory:LOAD:LIMit <label>,<file_name>
Description
Imports the edited limit line file (.csv).