Instructions

Chapter 2 Command Systems for GPSA and RTSA Modes RIGOL
RSA3000E Programming Guide 2-87
:INITiate Commands
Command List:
 :INITiate:CONTinuous
 :INITiate[:IMMediate]
Remarks:
The commands with * are only available for the RSA3000 series that has been installed with advanced
measurement kit option.
:INITiate:CONTinuous
Syntax
:INITiate:CONTinuous OFF|ON|0|1
:INITiate:CONTinuous?
Description
Selects continuous (ON|1) or single (OFF|0) measurement mode.
Queries the current measurement mode.
Parameter
Name
Type
Range
Default
——
Bool
OFF|ON|0|1
ON|1
Return Format
The query returns 0 or 1.
Example
The following command sets the instrument to sweep continuously.
:INITiate:CONTinuous ON or :INITiate:CONTinuous 1
The following query returns 1.
:INITiate:CONTinuous?
:INITiate[:IMMediate]
Syntax
:INITiate[:IMMediate]
Description
In non-measurement state, initialize a sweep.
In measurement state, trigger a measurement.
Explanation
Use the :FETCh? command to transmit a measurement result from the internal memory to the output
buffer.