User manual

Chapter 2 Command System RIGOL
RSA3000 Programming Guide 2-153
[:SENSe]:POWer[:RF]:MIXer:RANGe[:UPPer]
Syntax
[:SENSe]:POWer[:RF]:MIXer:RANGe[:UPPer] <ampl>
[:SENSe]:POWer[:RF]:MIXer:RANGe[:UPPer]?
Description
Sets the maximum power of the input mixer.
Queries the maximum power of the input mixer.
Parameter
Name
Type
Range
Default
<ampl>
Consecutive Real Number
-50 dBm to -10 dBm
-10 dBm
Return Format
The query returns the maximum power of the input mixer in scientific notation. The unit is dBm.
Example
The following command sets the maximum power of the input mixer to -20 dBm.
:SENSe:POWer:RF:MIXer:RANGe:UPPer -20
The following query returns -2.000000000e+01.
:SENSe:POWer:RF:MIXer:RANGe:UPPer?
[:SENSe]:SIGCapture:2FSK:AMPDown
Syntax
[:SENSe]:SIGCapture:2FSK:AMPDown <ample>
[:SENSe]:SIGCapture:2FSK:AMPDown?
Description
Sets the lower limit of the amplitude of 2FSK signal.
Queries the lower limit of the amplitude of 2FSK signal.
Parameter
Name
Type
Range
Default
<ample>
Consecutive Real Number
-400 dBm to amplitude upper limit
-100 dBm
Remarks
This command is only available for RTSA mode and valid when the SSC function is enabled.
Return Format
The query returns the amplitude lower limit in scientific notation.
Example
The following command sets the amplitude lower limit to -20 dBm.
:SENSe:SIGCapture:2FSK:AMPDown -20
The following query returns -2.000000000e+01.
:SENSe:SIGCapture:2FSK:AMPDown?