Information

RSAxxx(N) EMI Mode – Getting Started
RIGOL Technologies CO., LTD. 09.09.2021
Figure 9: Template to generate a test report for documentation
 You can also select the number of peak you want to mark
 In case the measurement meter are coupled to the signal, then the meter jump to the selected
peak and measure it (see figure 8).
Generate a Test Report for Documentation:
 The EMI Mode has the possibility to store the *.csv file of the trace or generate a test report as
follow:
o Please select [Save]  [Meas Data]  [Data Type] ([Trace] = csv, [Meas Result] = test
report)
o In menu [Meas Data]  [Meas Results] you can make adjustments like print as pdf or
HTML, use inverted screen (save print color) and decide what all should be in the report.
You can also fill in the heather (e.g. temperature, name of DUT, test place, etc., see
figure 9).
Storage of Settings:
 You can store the limit lines and the settings in [Save].
Note: Limit lines and correction needs to be stored separately. The main adjustments (e.g. activation
of limit line) is stored in [State] but not the limit line itself.