Datasheet

Amplitude
Measurement Range
Range
f
c
≥ 10 MHz
DANL to +30 dBm
Maximum Safe Input Level
[1]
DC Voltage 50 V
CW RF Power
+30 dBm, attenuation ≥ 40 dB, preamp off.
-10 dBm, attenuation = 20 dB, preamp on.
Maximum Damage Level
CW RF Power +33 dBm (2 W)
Note: [1] When f
c
< 10 MHz, the maximum safe input level is decreased.
Displayed Average Noise Level (DANL)
RSA3030 RSA3030-TG RSA3045 RSA3045-TG
attenuation = 0 dB, sample detector, trace averages ≥ 50, tracking generator off,
normalized to 1 Hz, 20℃ to 30℃, input impedance = 50 Ω.
Preamp off
9 kHz to 100 kHz <-120 dBm (typical) <-120 dBm (typical)
100 kHz to 20 MHz <-135 dBm, <-140 dBm (typical) <-135 dBm, <-140 dBm (typical)
20 MHz to 2.7 GHz <-138 dBm, <-141 dBm (typical) <-138 dBm, <-141 dBm (typical)
2.7 GHz to 3.0 GHz <-136 dBm, <-141 dBm (typical) <-136 dBm, <-141 dBm (typical)
3.0 GHz to 4.5 GHz <-136 dBm, <-140 dBm (typical)
Preamp on
100 kHz to 20 MHz <-152 dBm, <-160 dBm (typical) <-152 dBm, <-160 dBm (typical)
20 MHz to 2.7 GHz <-158 dBm, <-161 dBm (typical) <-158 dBm, <-161 dBm (typical)
2.7 GHz to 3.0 GHz <-156 dBm, <-161 dBm (typical) <-156 dBm, <-161 dBm (typical)
3.0 GHz to 4.5 GHz <-154 dBm, <-159 dBm (typical)
RIGOL
4