Instructions

Chapter 3 Command System for EMI Mode RIGOL
RSA3000E Programming Guide 3-41
:DISPlay:WINDow:TRACe:Y:DLINe
Syntax
:DISPlay:WINDow:TRACe:Y:DLINe <ampl>
:DISPlay:WINDow:TRACe:Y:DLINe?
Description
Sets the position of the display line.
Queries the position of the display line.
Parameter
Name
Type
Range
Default
<ampl>
Consecutive Real Number
Current amplitude range
81.99 dBuV
Remarks
By default, the display line is disabled. When the display line is enabled for the first time, its position is
81.99 dBuV.
Return Format
The query returns the position of the display line in scientific notation.
Example
The following command sets the position of the display line to -10 dBm.
:DISPlay:WINDow:TRACe:Y:DLINe -10
The following query returns -1.000000000e+01.
:DISPlay:WINDow:TRACe:Y:DLINe?
:DISPlay:WINDow:TRACe:Y:DLINe:STATe
Syntax
:DISPlay:WINDow:TRACe:Y:DLINe:STATe OFF|ON|0|1
:DISPlay:WINDow:TRACe:Y:DLINe:STATe?
Description
Turns on or off the display line.
Queries the status of the display line.
Parameter
Name
Type
Range
Default
--
Bool
OFF|ON|0|1
OFF|0
Return Format
The query returns 0 or 1.
Example
The following command enables the display line.
:DISPlay:WINdow:TRACe:Y:DLINe:STATe ON or :DISPlay:WINdow:TRACe:Y:DLINe:STATe 1
The following query returns 1.
:DISPlay:WINdow:TRACe:Y:DLINe:STATe?