Instructions

RIGOL Chapter 4 Functions of the Front Panel of EMI
4-54 RSA3000E User Guide
Settings
1. Power Switch
Sets whether the power switch on the front panel is effective or not.
 Default: When the analyzer is powered on, press the power switch on the
front panel to start up the analyzer.
 Always: When the analyzer is powered on, it starts automatically.
2. Beep Switch
Turns on or off the beeper.
3. Volume
After you turn on the beeper, you can press this key to adjust the volume of the
beeper.
4. User Key
Defines an associated function for the User key on the front panel. The
definition method is as described below. After that, pressing User in any
operation interface can quickly enable the defined function.
 Press User Key to select "On";
 Open the function menu that needs to be defined. For example, press
System  Display  Display Line;
 Press User and the definition is finished. At this time, User Key turns off
automatically.
5. SCPI Display
When you use the SCPI commands to control the instrument remotely, turning
on the SCPI Display will go to the specified menu of the corresponding
command; turning off the SCPI Display will not go to the specified menu.
System Message
Press this key, and then a prompt message dialog box will be displayed. You can
press the corresponding front-panel softkey to select to view all the messages, the
messages that have been read or not read. You can also use the touch screen or the
externally connected mouse to tap or click the specified icon in the prompt message
dialog box.
1. Select All
Selects all the displayed messages.
2. Select Read
Only selects the messages that have been read.