Datasheet

Installation Guide RIGOL
1
DP700 Rack Mount Kit
RM-1-DP700
This rack mount kit (RM-1-DP700) is designed to mount a single RIGOL DP700 series
programmable linear DC power supply into a 19-inch cabinet that conforms to the Electronic
Industries Association (EIA) standard.
Kit Part Checklist (RM-1-DP700)
No. Name Qty. Description
1 Right Fastener 1 --
2 Filler Panel 2 --
3 Left Fastener 1 --
4 Rail 2 --
5 M4 Screw 24 M4x8 Phillips Pan Head Screw
6 Bottom Plate 1 --
7 Side Beam Fastener 4 --
8 M6 Screw 12
M6x16 Phillips Pan Head Screw
9 M6 Nut 12
M6 Square Lock Cage Nut
5 8 9
RIGOL
3
4
6
7
1
2
5
Installation Guide RIGOL
2
Installation Tool
The PH2 Philips screwdriver is recommended.
Space Requirements
To mount the instrument into the cabinet correctly, please ensure that the following
requirements are met.
 The cabinet must be a standard 19-inch one.
 The available height of the cabinet should be at least 4U.
 The depth of the cabinet should be at least 500 mm.
The dimensions of the rack are as shown below.
Unit: mm
Installation Procedures
CAUTION
Only authorized operators are allowed to perform the installation. Improper
installation might cause damage to the instrument or an installation failure.