Data Sheet

14
RIGOL
The Web Control software and Ultra Scope control analysis
software are served as the standard configurations for the
MSO7000/DS7000 series. You can use them to migrate the
instrument control and waveform analysis to the PC, and then
click the mouse to operate easily.
You only need to input the IP address of the oscilloscope into
the address bar of the Web browser to open the Web Control
software. The display of the waveform interface and instrument
control in the software are consistent with that in the MSO7000/
DS7000 series. You can use the mouse to tap the keys or knobs
in the Web Control interface to complete the waveform control,
measurement, and analysis. In the Web Control interface, the
basic information of the instrument is displayed, and you can
also upload or download the files of the oscilloscope, control
with the SCPI commands, set or modify the network status.
Remote Control and Offline Analysis Software
The powerful data analysis function of the MSO7000/
DS7000 series is not only limited to the oscilloscope itself.
The Ultra Scope control analysis software can not only
realize the basic control for the instrument, but also can
export the 500 M waveform big data to the PC, and then
make measurements, math operation, and analysis of
the data offline. It also supports real-time monitoring of
the oscilloscope status and display in multiple windows
with multiple instruments. The available remote control
interfaces include USB, LAN, and GPIB, and you can
select any one of them to realize remote control.