Datasheet

RIGOL

Quick Waveform Save

Quickly save the screen or memory waveforms to the specified path based on the current

waveform storage menu settings

Quick Save Settings Quickly save the setup file to the specified path based on the current setup storage menu settings

Quick All Measurement Display all the prompt message windows for all the measurement of the waveforms.

Quick Reset of Statistics

Quickly reset all the measurement statistics data and measurement counts

Quickly reset all the statistics information in PassFail function

Command Set

Common Commands Support IEEE488.2 Standard

Error Message Definition Error messages

Support Status Report Mechanism Status reporting

Support Syn Mechanism Synchronization

Display

LCD 10.1-inch capacitive multi-touch screen/gesture enabled operation

Resolution 1024×600 (Screen Region)

Graticule (10 vertical divisions) x (8 horizontal divisions)

Persistence Off, Infinite, variable persistence (100 ms to 10 s)

Brightness 256 intensity levels (LCD,HDMI)

I/O

USB 2.0 Hi-speed Host Port 4 (3 on the front panel and 1 on the rear panel)

USB 2.0 Hi-speed Device Port 1 on the rear panel, compatible with USB Test and Measurement Class (USBTMC)

LAN 1 on the rear panel, 10/100/1000-port, supporting LXI-C

GPIB GPIB-USB adapter (option)

Web Remote Control

Support VNC Web interface (input the IP address of the oscilloscope into the Web browser to

display the operation interface of the oscilloscope)

HDMI video output 1 on the rear panel, HDMI 1.4b, A plug. used to connect to an external monitor or projector

Aux Output

BNC output on the rear panel

Vo (H)≥2.5 V open circuit, ≥1.0 V 50 Ω to GND

Vo (L)≤0.7 V to load ≤4 mA; ≤0.25 V 50 Ω to GND

Trig Out Output a pulse signal when the oscilloscope is triggered

Pass/Fail

Output a pulse signal when a pass/fail event occurs. Support user-defined pulse polarity and pulse

time (100 ns ~ 10 ms)

Probe Compensation Output 1 kHz, 3 Vpp square waveform

Power Supply

Power Voltage 100 V-240 V, 45 Hz-440 Hz

Power Max. 200 W (connect to various interfaces, USB, and active probes)

Fuse 3.15 A, T degree, 250 V

Environment

Environmental Stress

Temperature Range

Operating 0℃ ~ +50℃

Non-operating -30℃ ~ +70℃