Datasheet

20
RIGOL
Ramp
Frequency Range 100 mHz to 100 kHz
Linearity 1%
Symmetry 0% to 100%
Noise Bandwidth >25 MHz
Built-in Waveform Frequency Range 100 mHz to 1 MHz
Arbitrary Waveform
Frequency Range 100 mHz to 10 MHz
Waveform Length 2 ~ 16 kpts
support loading channel waveforms and stored waveforms
Frequency
Accuracy 100 ppm (<10 kHz), 50 ppm (>10 kHz)
Resolution 100 mHz or 4 bits (whichever is greater)
Amplitude
Output Range 20 mVpp ~ 5 Vpp (HighZ), 10 mVpp ~ 2.5 Vpp (50 Ω)
Resolution 100 uV or 3 bits (whichever is greater)
Accuracy 2% (1 kHz)
DC Offset
Range ±2.5 V (HighZ), ±1.25 V (50 Ω)
Resolution 100 uV or 3 bits (whichever is greater)
Accuracy ±2% of offset setting
Sweep
AM, FM, FSK
AM
Modulating Waveforms: Sine, Square, Triangle, and Noise.
Modulation Frequency: 1 Hz to 50 kHz
Modulation Depth: 0% to 120%
FM
Modulating Waveforms: Sine, Square, Triangle, and Noise.
Modulation Frequency: 1 Hz to 50 kHz
Modulation Offset: 1 Hz to carrier frequency
FSK
Modulating Waveforms: 50% duty cycle square
Modulation Frequency: 1 Hz to 50 kHz
Hopping Frequency: 100 mHz to max. carrier frequency
Sweep
Linear, Log, and Step
Sweep Time 1 ms to 500 s
Start Frequency and End
Frequency
any frequencies within the waveform range
Burst
N Cycle, Infinite
Cycle Count 1 to 1000000
Burst Period 1 μs to 500 s
Burst Delay 0 s to 100 s
Trigger Source Internal, Manual
Digital Voltmeter
Digital Voltmeter (technical specifications are typical values)
Source Any analog channel
Function DC, AC+DC RMS, and AC RMS
Resolution ACV/DCV: 3 bits
Limits Beeper Sound an alarm when the voltage value is within or outside of the limit range.
Range Measurement
Display the latest measurement results in the form of a diagram, and display the extrema over the
last 3 seconds
High-precision Frequency Counter
High-precision Frequency Counter
Totalizer
Source Any analog channel and digital channel
Resolution max. 6 bits, user-defined
Max. Frequency max. bandwidth of the analog channel
Measure frequency, period, totalizer
Accumulator
Source 48-bit totalizer
Edge count the number of the rising edges
Time Reference Internal Reference
Customization for Quick Key
Customization for Quick Key
Quick Screenshot
Quickly save the screen image to the specified path based on the current image storage menu
settings