Datasheet

18
RIGOL
Auto
Measurement
Number of
Measurements
41 auto measurements; and up to 10 measurements can be displayed at a time
Measurement
Source
CH1 ~ CH4, Math1 ~ Math4, and D0 ~ D15 (only for MSO model)
Measurement
Mode
Normal and Precision (full-memory hardware measurement)
Measurement
Range
Main, Zoom, and Cursor
All Measurement
Display 33 measurement items for the current measurement channel; the measurement results
are updated continuously; you can switch the measurement channel
Vertical
Vmax, Vmin, Vpp, Vtop, Vbase, Vamp, Vupper, Vmid, Vlower, Vavg, VRMS, Per. VRMS,
Overshoot, Preshoot, Area, Period Area, and Std Dev
Horizontal
Period, Frequency, Rise Time, Fall Time, +Width, -Width, +Duty, -Duty, Positive Pulse Count,
Negative Pulse Count, Rising Edge Count, Falling Edge Count, Tvmax, Tvmin, +Slew Rate, and
-Slew Rate
Others
Delay(1↑-2↑), Delay(1↑-2↓), Delay(1↓-2↑), Delay(1↓-2↓), Phase(1↑-2↑),
Phase(1↑-2↓), Phase(1↓-2↑), and Phase(1↓-2↓)
Analysis Frequency counter, DVM, power analysis, histogram
Statistics
Current, Average, Max, Min, Standard Deviation, Count
Statistical times settable
Waveform Calculation
Waveform Calculation
No. of Math Functions 4; 4 math functions available to be displayed at a time
Operation
A+B, A-B, A×B, A/B, FFT, A&&B, A||B, A^B, !A, Intg, Diff, Sqrt, Lg, Ln, Exp, Abs, AX+B, LowPass,
HighPass, BandPass, and BandStop
Color Grade Supporting Math and FFT
Enhanced FFT
Record Length Max. 1 Mpts
Window Type Rectangular (default), Blackman-Harris, Hanning, Hamming, Flattop, and Triangle
Pane Half, Full
Peak Search a maximum of 11 peaks, confirmed by the settable threshold and offset threshold set by users
Waveform Analysis
Waveform Analysis
Pass/Fail Test
Compare the signal under test with the user-defined mask to provide the test results: the number of
successful tests, failed tests, and the total number of tests. The pass/fail event can enable immediate
stop, beeper, and the screenshot
Source
Any analog channel
Histogram
The waveform histogram provides a group of data, showing the number of times a waveform
hits within the defined region range on the screen. The waveform histogram not only shows the
distribution of hits, but also the ordinary measurement statistics
Source Any analog channel or auto measurement item
Type horizontal, vertical, or measurement
Measure sum, peak, max, min, pKpk, mean, median, mode, bin width, and sigma
Mode Support all modes, except the Zoom, XY, and ROLL modes
Color Grade
Provide a dimensional view for color grade waveforms
Source Any analog channel
Color Theme Temperature and intensity
Mode Support all modes
Parallel Decoding
Parallel Decoding
Number of
Decodings
4, four protocol types can be supported at the same time
Decoding Type
Standard: Parallel
Option: RS232, UART, I2C, SPI, LIN, CAN, FlexRay, I2S, and MIL-STD-1553
Parallel
Up to 20 bits of Parallel decoding, supporting the combination of any analog channel and digital channel. Support user-
defined clock and auto clock settings
Source channel: CH1 ~ CH4, D0 ~ D15