Datasheet

11
RIGOL
Power Analysis (Option)
To cater to the increasing test demand for the switch
power supply and the power component, we configure the
MSO7000/DS7000 series with the optional built-in power
analysis software. The current power analysis software can
complete the power quality analysis and ripple analysis,
helping engineers analyze the commonly used power
parameters rapidly and accurately, without needing to make
tedious configurations manually or do complicated formula
calculation.
The Web Control software and Ultra Scope control analysis
software are served as the standard configurations for the
MSO7000/DS7000 series. You can use them to migrate the
instrument control and waveform analysis to the PC, and then
click the mouse to operate easily.
You only need to input the IP address of the oscilloscope into
the address bar of the Web browser to open the Web Control
software. The display of the waveform interface and instrument
control in the software are consistent with that in the MSO7000/
DS7000 series. You can use the mouse to tap the keys or knobs
in the Web Control interface to complete the waveform control,
measurement, and analysis. In the Web Control interface, the
basic information of the instrument is displayed, and you can
also upload or download the files of the oscilloscope, control
with the SCPI commands, set or modify the network status.
The powerful data analysis function of the MSO7000/DS7000
series is not only limited to the oscilloscope itself. The Ultra
Scope control analysis software can not only realize the basic
control for the instrument, but also can export the 500 M
waveform big data to the PC, and then make measurements,
math operation, and analysis of the data offline. It also supports
real-time monitoring of the oscilloscope status and display
in multiple windows with multiple instruments. The available
remote control interfaces include USB, LAN, and GPIB, and you
can select any one of them to realize remote control.
Remote Control and Offline Analysis Software