Data Sheet
22
RIGOL
Enhanced FFT
Record Length Max. 1 Mpts
Window Type Rectangular, Blackman-Harris, Hanning (default), Hamming, Flattop, and Triangle.
Peak Search A maximum of 15 peaks, confirmed by the settable threshold and offset threshold set by users
Waveform Analysis
Waveform Analysis
Waveform
Recording
Store the signal under test in segments according to the trigger events, i.g. save all the sampled
waveform data as a segment to the RAM for each trigger event. The maximum number of the sampled
segments reaches 450,000.
Source All enabled analog channels and digital channels
Analysis
Support playing frame by frame or continuous playing; capable of calculating, measuring, and decoding
the played waveforms
Pass/Fail Test
Compare the signal under test with the user-defined mask to provide the test results: the number of
successful tests, failed tests, and the total number of tests. The pass/fail event can enable immediate
stop, beeper, and the screenshot.
Source Any analog channel
Histogram
The waveform histogram provides a group of data, showing the number of times a waveform hits within
the defined region range on the screen. The waveform histogram not only shows the distribution of hits,
but also the ordinary measurement statistics.
Source Any analog channel or auto measurement item
Type Horizontal, Vertical, or Measure
Measure Sum, Peaks, Max, Min, Pk_Pk, Mean, Median, Mode, Bin width, Sigma, and XScale
Mode Support all modes, except the Zoom, XY, and ROLL modes
Color Grade
Provide a dimensional view for color grade waveforms
Source Any analog channel
Color Theme Temperature and intensity
Mode Support all modes
Serial Decoding
Serial Decoding
Number of Decodings 4, four protocol types can be supported at the same time
Decoding Type
Standard: Parallel
Option: RS232, UART, I2C, SPI, LIN, CAN, FlexRay, I2S, and MIL-STD-1553
Parallel
Up to 20 bits of Parallel decoding, supporting the combination of any analog channel and digital channel.
Support user-defined clock and auto clock settings.
Source channel: CH1~CH4, D0~D15
RS232/UART
MSO5000-COMP option
Decode the RS232/UART (up to 20 Mb/s) bus's TX/RX data (5-9 bits), parity (Odd, Even, or None), and
stop bits (1-2 bits)
Source channel: CH1~CH4, D0~D15
I2C
MSO5000-EMBD option
Decode the address (with or without the R/W bit) of the I2C bus, data, and ACK.
Source channel: CH1~CH4, D0~D15
SPI
MSO5000-EMBD option
Decode the MISO/MOSI data (4-32 bits) of the SPI bus. The available mode includes "Timeout" and "CS".
Source channel: CH1~CH4, D0~D15
LIN
MSO5000-AUTO option
Decode the protocol version (1.X or 2.X) of the LIN bus (up to 20 Mb/s). The decoding displays sync, ID,
data, and check sum.
Source channel: CH1~CH4, D0~D15
CAN
MSO5000-AUTO option
Decode the remote frame (ID, byte number, CRC), overload frame, and data frame (standard/extended
ID, control domain, data domain, CRC, and ACK) of the CAN bus (up to 5 Mb/s). The supported CAN bus
signal types include CAN_H, CAN_L, TX/RX, and DIFF.
Source channel: CH1~CH4, D0~D15
FlexRay
MSO5000-FLEX option
Decode the frame ID, PL (payload), Header CRC, Cycle Count, Data, Tail CRC, and DTS of the FlexRay
bus (up to 10 Mb/s). The supported signal types include BP, BM, and RX/TX.
Source channel: CH1~CH4, D0~D15
I2S
MSO5000-AUDIO option
Decode I2S audio bus left channel data and right channel data, supporting 4-32 bits. The alignment
modes include I2S, LJ, and RJ.
Source channel: CH1~CH4, D0~D15 (only available for the MSO5XX4 model or the model installed with
the MSO5000-4CH option)