User manual

RIGOL Chapter 2 Command System
2-144 MSO5000 Programming Guide
receiving the trigger signal.
 INFinite: sets the number of cycles to Infinite. It outputs continuous waveforms once
receiving the trigger signal.
Return
Format
The query returns NCYC or INF.
Example
:BURSt:TYPE INFinite /*Sets the burst type of GI to INFinite.*/
:BURSt:TYPE? /*The query returns INF.*/
[:SOURce[<n>]]:BURSt:CYCLes
Syntax
[:SOURce[<n>]]:BURSt:CYCLes <count>
[:SOURce[<n>]]:BURSt:CYCLes?
Description
Sets or queries the number of burst cycles of the specified signal source channel.
Parameter
Name
Type
Range
Default
[<n>]
Discrete
{1|2}
When omitted, by default,
the operations are carried
out on GI.
<count>
Integer
1 to 10
1
Remarks
This command is invalid when the burst type is "Infinite".
Return
Format
The query returns an integer ranging from 1 to 10.
Example
:BURSt:CYCLes 3 /*Sets the burst cycles of GI to 3.*/
:BURSt:CYCLes? /*The query returns 3.*/
[:SOURce[<n>]]:BURSt:DELay
Syntax
[:SOURce[<n>]]:BURSt:DELay <time>
[:SOURce[<n>]]:BURSt:DELay?
Description
Sets or queries the burst delay time of the specified signal source channel.
Parameter
Name
Type
Range
Default
[<n>]
Discrete
{1|2}
When omitted, by default,
the operations are carried
out on GI.
<time>
Integer
Refer to Remarks
0 s
Remarks
 Burst delay indicates the time from when receiving the trigger signal to starting to
output N Cycle of bursts or Infinite burst.
 The available range of the delay time is related to the burst cycles.
Return
Format
The query returns an integer.
Example
:BURSt:DELay 3 /*Sets the burst delay time of GI to 3 s.*/
:BURSt:DELay? /*The query returns 3.*/