User manual

Chapter 2 Command System RIGOL
MSO5000 Programming Guide 2-143
[:SOURce[<n>]]:SWEep:STIMe
Syntax
[:SOURce[<n>]]:SWEep:STIMe <time>
[:SOURce[<n>]]:SWEep:STIMe?
Description
Sets or queries the sweep time of the specified signal source channel.
Parameter
Name
Type
Range
Default
[<n>]
Discrete
{1|2}
When omitted, by default,
the operations are carried
out on GI.
<time>
Integer
1 ms to 500 s
1 s
Remarks
After modifying the sweep time, the function/arbitrary waveform generator will restart to
output from the specified "Start Freq".
Return
Format
The query returns an integer ranging from 1 ms to 500 s.
Example
:SWEep:STIMe 30 /*Sets the sweep time of GI to 30 s.*/
:SWEep:STIMe? /*The query returns 30.*/
[:SOURce[<n>]]:SWEep:BTIMe
Syntax
[:SOURce[<n>]]:SWEep:BTIMe <time>
[:SOURce[<n>]]:SWEep:BTIMe?
Description
Sets or queries the return time of the specified signal source channel.
Parameter
Name
Type
Range
Default
[<n>]
Discrete
{1|2}
When omitted, by default,
the operations are carried
out on GI.
<time>
Integer
0 s to 500 s
0 s
Remarks
Return time indicates the time that the output signal restores from "End Freq" to "Start
Freq" after the Function/Arbitrary Waveform Generator sweeps from "Start Freq" to "End
Freq" and the "End Keep" time expires.
Return
Format
The query returns an integer ranging from 0 s to 500 s.
Example
:SWEep:BTIMe 30 /*Sets the return time of GI to 30 s.*/
:SWEep:BTIMe? /*The query returns 30.*/
[:SOURce[<n>]]:BURSt:TYPE
Syntax
[:SOURce[<n>]]:BURSt:TYPE <type>
[:SOURce[<n>]]:BURSt:TYPE?
Description
Sets or queries the burst type of the specified signal source channel.
Parameter
Name
Type
Range
Default
[<n>]
Discrete
{1|2}
When omitted, by default,
the operations are carried
out on GI.
<type>
Discrete
{NCYCle|INFinite}
NCYCle
Remarks
 NCYCle: outputs the burst waveforms with a specified number of cycles once