Instructions
Table Of Contents
- Guaranty and Declaration
- Safety Requirement
- MSO5000-E Series Overview
- Document Overview
- Quick Start
- General Inspection
- Appearance and Dimensions
- To Prepare for Use
- Front Panel Overview
- Rear Panel Overview
- Front Panel Function Overview
- User Interface
- Touch Screen Controls
- Parameter Setting Method
- To Use the Kensington Security Lock
- To Use the Built-in Help System
- To View the Option Information and the Option Installation
- To Set the Vertical System
- To Set the Horizontal System
- To Set the Sample System
- To Trigger the Oscilloscope
- Trigger Source
- Trigger LEVEL/Threshold Level
- Trigger Mode
- Trigger Coupling
- Trigger Holdoff
- Noise Rejection
- Trigger Type
- Edge Trigger
- Pulse Trigger
- Slope Trigger
- Video Trigger
- Pattern Trigger
- Duration Trigger
- Timeout Trigger
- Runt Trigger
- Window Trigger
- Delay Trigger
- Setup/Hold Trigger
- Nth Edge Trigger
- RS232 Trigger (Option)
- I2C Trigger (Option)
- SPI Trigger (Option)
- CAN Trigger (Option)
- FlexRay Trigger (Option)
- LIN Trigger (Option)
- I2S Trigger (Option)
- MIL-STD-1553 Trigger (Option)
- Zone Trigger
- Trigger Output Connector
- Operations and Measurements
- Digital Voltmeter (DVM) and Frequency Counter
- Power Analysis (Option)
- Histogram Analysis
- Digital Channel
- Protocol Decoding
- Reference Waveform
- To Enable Ref Function
- To Select the Reference Channel
- To Select the Ref Source
- To Adjust the Ref Waveform Display
- To Save to Internal Memory
- To Clear the Display of the Reference Waveform
- To View Details of the Reference Waveform
- To Reset the Reference Waveform
- Color Setting
- Label Setting
- To Export to Internal or External Memory
- To Import from Internal or External Memory
- Pass/Fail Test
- Waveform Recording & Playing
- Search and Navigation Function
- Display Control
- Function/Arbitrary Waveform Generator (Option)
- Store and Load
- System Utility Function Setting
- Remote Control
- Troubleshooting
- Appendix
- Index
Index RIGOL
MSO5000-E User Guide 1
Index
+Duty ...................................... 6-30
+Rate ...................................... 6-34
+Width .................................... 6-29
Acquisition Mode ........................ 4-5
AM ........................................ 17-14
Anti-Aliasing ............................. 4-10
Area ........................................ 6-34
AutoIP ..................................... 19-3
Aux Output .............................. 19-8
Average ..................................... 4-5
Bandwidth Limit .......................... 2-5
Blackman-Harris ......................... 6-9
Built-in Waveform ..................... 17-6
Channel Coupling ........................ 2-5
Channel Label ............................. 2-9
DC .......................................... 17-5
DC offset voltage ...................... 17-2
Default Gateway ....................... 19-4
Delay ....................................... 6-31
Delay Calibration ......................... 2-8
Delay Trigger ............................ 5-27
Delayed Sweep .................... 3-2, 3-4
Digital Channel ......................... 10-1
Domain Name Server ................ 19-4
Dots ........................................ 16-2
Duration Trigger ....................... 5-19
Duty ........................................ 17-4
-Duty ....................................... 6-30
ECG ......................................... 17-7
Edge Trigger ............................... 5-9
Edge Type ................................ 5-32
Edit Waveforms ...................... 17-12
End of Frame Error ................. 11-13
Exp.Fall .................................... 17-7
Factory Settings ...................... 18-13
Fall Time .................................. 6-29
Falling Edge Count .................... 6-31
Flattop ....................................... 6-9
FM .............................. 17-15, 17-16
Frequency ........................ 6-29, 17-2
Gauss ...................................... 17-8
GPIB ........................................ 19-6
Hamming ................................... 6-9
Hanning .................................... 6-9
Haversine ................................. 17-9
Horizontal Expansion .................
4-11
Horizontal Position ...................... 3-3
I2C Decoding .......................... 11-14
I2C Trigger ............................... 5-35
I2S Trigger ............................... 5-46
Idle Time .................................. 5-32
Impedance ............................... 17-3
IP Address ................................ 19-3
Lorentz ..................................... 17-9
MAC ........................................
19-5
mDNS ...................................... 19-5
Memory Depth ........................... 4-9
Modulating Waveform .... 17-14, 17-15
Modulation ............................. 17-13
Modulation Depth .................... 17-15
Modulation Deviation ............... 17-16
Modulation Frequency ... 17-14, 17-15,
17-16
Negative Pulse Count ................. 6-30
Network Status ......................... 19-2
Noise ....................................... 17-5
Noise Rejection .......................... 5-7
Normal ...................................... 4-5
Nth Edge Trigger ....................... 5-31
Overshoot................................. 6-34
Parallel Decoding ....................... 11-2
Pattern Setting ................. 5-18, 5-20
Peak Detection ........................... 4-6
Period ...................................... 6-29
Period Area ............................... 6-34
Persistence Time ....................... 16-2
Phase ....................................... 6-31
Picture ..................................... 18-2
Polarity ............................ 5-11, 5-52
Positive Pulse Count .................. 6-30
Preshoot ................................... 6-34
Probe Ratio .......................... 2-6, 2-7
Pulse ........................................ 17-4
Pulse Condition ......................... 5-11
Pulse Polarity ............................ 5-24
Pulse Trigger ............................. 5-10