Instructions
Table Of Contents
- Guaranty and Declaration
- Safety Requirement
- MSO5000-E Series Overview
- Document Overview
- Quick Start
- General Inspection
- Appearance and Dimensions
- To Prepare for Use
- Front Panel Overview
- Rear Panel Overview
- Front Panel Function Overview
- User Interface
- Touch Screen Controls
- Parameter Setting Method
- To Use the Kensington Security Lock
- To Use the Built-in Help System
- To View the Option Information and the Option Installation
- To Set the Vertical System
- To Set the Horizontal System
- To Set the Sample System
- To Trigger the Oscilloscope
- Trigger Source
- Trigger LEVEL/Threshold Level
- Trigger Mode
- Trigger Coupling
- Trigger Holdoff
- Noise Rejection
- Trigger Type
- Edge Trigger
- Pulse Trigger
- Slope Trigger
- Video Trigger
- Pattern Trigger
- Duration Trigger
- Timeout Trigger
- Runt Trigger
- Window Trigger
- Delay Trigger
- Setup/Hold Trigger
- Nth Edge Trigger
- RS232 Trigger (Option)
- I2C Trigger (Option)
- SPI Trigger (Option)
- CAN Trigger (Option)
- FlexRay Trigger (Option)
- LIN Trigger (Option)
- I2S Trigger (Option)
- MIL-STD-1553 Trigger (Option)
- Zone Trigger
- Trigger Output Connector
- Operations and Measurements
- Digital Voltmeter (DVM) and Frequency Counter
- Power Analysis (Option)
- Histogram Analysis
- Digital Channel
- Protocol Decoding
- Reference Waveform
- To Enable Ref Function
- To Select the Reference Channel
- To Select the Ref Source
- To Adjust the Ref Waveform Display
- To Save to Internal Memory
- To Clear the Display of the Reference Waveform
- To View Details of the Reference Waveform
- To Reset the Reference Waveform
- Color Setting
- Label Setting
- To Export to Internal or External Memory
- To Import from Internal or External Memory
- Pass/Fail Test
- Waveform Recording & Playing
- Search and Navigation Function
- Display Control
- Function/Arbitrary Waveform Generator (Option)
- Store and Load
- System Utility Function Setting
- Remote Control
- Troubleshooting
- Appendix
- Index
RIGOL Chapter 1 Quick Start
1-10 MSO5000-E User Guide
Front Panel Overview
Figure 1-11 Front Panel
Table 1-1 Front Panel Description
No.
Description
No.
Description
1
Capacitive Touch Screen
13
Trigger Control System
2
Function Menu Operation Keys
14
Horizontal Control System
3
Function/Arbitrary Waveform
Generator Setting Key
[1]
15 Navigation Control key
4
Quick Key (Shortcut Key)
16
Vertical Control System
5
Multifunction Knob 17
Probe Compensation Signal
Output Terminal/Ground Terminal
6
Common Operation Keys
18
External Trigger Input
7
CLEAR Key
19
Analog Channel Input
8
Auto Waveform Display Key
20
Digital Channel Input
[2]
9 RUN/STOP Key 21
Function/Arbitrary Waveform
Generator Output Terminal
[1]
10
Single Trigger Control Key
22
USB HOST Interface
11
Touch Lock Key
23
Power Key
12
Default Setting Key
--
--
Note
[1]
: This function is only available for the model installed with the MSO5000-E-AWG option.
Note
[2]
: PLA2216 active logic probe option is required to be ordered.
1 2 3
4
5
6
7 8
9 10
23 22 21 20 19 18 17
11
12
13
14
15
16