Instructions
RIGOL Chapter 2 Command System
2-148 MSO5000-E Programming Guide
:SYSTem:GPIB
Syntax :SYSTem:GPIB <adr>
:SYSTem:GPIB?
Description
Sets or queries the GPIB address.
Parameter
Name
Type
Range
Default
<adr>
Integer
1 to 30
1
Return
Format
The query returns an integer ranging from 1 to 30.
Example
:SYSTem:GPIB 2 /*Sets the GPIB address to 2.*/
:SYSTem:GPIB? /*The query returns 2.*/
:SYSTem:KEY:PRESs
Syntax
:SYSTem:KEY:PRESs <key>
Description
Press down the specified key on the front panel of the oscilloscope.
Parameter
Name
Type
Range
Default
<key>
Discrete
{CH1|CH2|MATH|REF|LA|DECode|MOFF|F1|F2|F3
|F4|F5|F6|F7|NPRevious|NNEXt|NSTop|VOFFset1|
VOFFset2|VSCale1|VSCale2|HSCale|HPOSition|KF
UNction|TLEVel|TMENu|TMODe|DEFault|CLEar|AU
TO|RSTop|SINGle|QUICk|MEASure|ACQuire|STOR
age|CURSor|DISPlay|UTILity|FORCe|GENerator1|
BACK|TOUCh|ZOOM|SEARch}
——
Remarks The value of the parameter <key> corresponds to the specified key on the front panel.
The definitions for the key are as follows:
CH1|CH2|MATH|REF|LA|DECode|DEFault|CLEar|AUTO|SINGle|QUICk|MEASure|AC
Quire|STORage|CURSor|DISPlay|UTILity|FORCe|BACK|TOUCh|ZOOM|SEARch:
press the specified key on the front panel.
MOFF: hides or display the menu at the right side of the screen.
F1|F2|F3|F4|F5|F6|F7: press the 7 menu softkeys at the right side of the screen.
NPRevious|NNEXt|NSTop: press the navigation key.
VOFFset1: press down the CH1 vertical offset knob, i.g. sets the vertical offset of
CH1 to 0.
VOFFset2: press down the CH2 vertical offset knob, i.g. sets the vertical offset of
CH2 to 0.
VSCale1: press down the vertical scale knob of CH1, i.g. switch the vertical scale of
CH1 to "Coarse" or "Fine".
VSCale2: press down the vertical scale knob of CH2, i.g. switch the vertical scale of
CH2 to "Coarse" or "Fine".
GENerator1: press down Gen.
HSCale: press down the horizontal time base adjustment knob, i.g. switch the
horizontal time base to "Coarse" or "Fine".
HPOSition: press down the horizontal position knob, i.g. set the horizontal position to
0.