Instructions

Chapter 2 Command System RIGOL
MSO5000-E Programming Guide 2-141
[:SOURce[<n>]]:SWEep:BTIMe
Syntax
[:SOURce[<n>]]:SWEep:BTIMe <time>
[:SOURce[<n>]]:SWEep:BTIMe?
Description
Sets or queries the return time of the specified signal source channel.
Parameter
Name
Type
Range
Default
[<n>]
Discrete
{1}
1
<time>
Integer
0 s to 500 s
0 s
Remarks Return time indicates the time that the output signal restores from "End Freq" to "Start
Freq" after the Function/Arbitrary Waveform Generator sweeps from "Start Freq" to "End
Freq" and the "End Keep" time expires.
Return
Format
The query returns an integer ranging from 0 s to 500 s.
Example
:SWEep:BTIMe 30 /*Sets the return time of GI to 30 s.*/
:SWEep:BTIMe? /*The query returns 30.*/
[:SOURce[<n>]]:BURSt:TYPE
Syntax
[:SOURce[<n>]]:BURSt:TYPE <type>
[:SOURce[<n>]]:BURSt:TYPE?
Description
Sets or queries the burst type of the specified signal source channel.
Parameter
Name
Type
Range
Default
[<n>]
Discrete
{1}
1
<type>
Discrete
{NCYCle|INFinite}
NCYCle
Remarks  NCYCle: outputs the burst waveforms with a specified number of cycles once
receiving the trigger signal.
 INFinite: sets the number of cycles to Infinite. It outputs continuous waveforms once
receiving the trigger signal.
Return
Format
The query returns NCYC or INF.
Example
:BURSt:TYPE INFinite /*Sets the burst type of GI to INFinite.*/
:BURSt:TYPE? /*The query returns INF.*/
[:SOURce[<n>]]:BURSt:CYCLes
Syntax
[:SOURce[<n>]]:BURSt:CYCLes <count>
[:SOURce[<n>]]:BURSt:CYCLes?
Description
Sets or queries the number of burst cycles of the specified signal source channel.
Parameter
Name
Type
Range
Default
[<n>]
Discrete
{1}
1
<count>
Integer
1 to 10
1
Remarks
This command is invalid when the burst type is "Infinite".
Return
Format
The query returns an integer ranging from 1 to 10.
Example
:BURSt:CYCLes 3 /*Sets the burst cycles of GI to 3.*/
:BURSt:CYCLes? /*The query returns 3.*/