Instructions

Chapter 2 Command System RIGOL
MSO5000-E Programming Guide 2-129
Return
Format
The query returns POS, NEG, or EITH.
Example
:SEARch:EDGE:SLOPe NEGative /*Sets the edge type to NEGative.*/
:SEARch:EDGE:SLOPe? /*The query returns NEG.*/
:SEARch:EDGE:SOURce
Syntax :SEARch:EDGE:SOURce <source>
:SEARch:EDGE:SOURce?
Description
Sets or queries the source for the "Edge" search type.
Parameter
Name
Type
Range
Default
<source> Discrete {CHANnel1|CHANnel2} CHANnel1
Return
Format
The query returns CHAN1 or CHAN2.
Example
:SEARch:EDGE:SOURce CHANnel1 /*Sets the source to CHANnel1.*/
:SEARch:EDGE:SOURce? /*The query returns CHAN1.*/
:SEARch:PULSe:POLarity
Syntax :SEARch:PULSe:POLarity <polarity>
:SEARch:PULSe:POLarity?
Description
Sets or queries the polarity for "Pulse" search type.
Parameter
Name
Type
Range
Default
<polarity>
Discrete
{POSitive|NEGative}
POSitive
Return
Format
The query returns POS or NEG.
Example
:SEARch:PULSe:POLarity POSitive /*Sets the polarity for "Pulse" search type to
POSitive.*/
:SEARch:PULSe:POLarity? /*The query returns POS.*/
:SEARch:PULSe:QUALifier
Syntax :SEARch:PULSe:QUALifier <qualifier>
:SEARch:PULSe:QUALifier?
Description
Sets or queries the search condition for "Pulse" search type.
Parameter
Name
Type
Range
Default
<qualifier>
Discrete
{GREater|LESS|GLESs}
GREater
Remarks  GREater: the positive/negative pulse width of the input signal is greater than the
specified pulse width.
 LESS: the positive/negative pulse width of the input signal is smaller than the
specified pulse width.