Instructions

RIGOL Chapter 1 Quick Start

1-10 MSO5000 User's Guide

Rear Panel Overview

Figure 1-11 Rear Panel

1. Handle

Rotate the handle upright to carry the instrument easily. Rotate it

downward if you do not need to carry it.

2. HDMI

Through this interface, you can connect the instrument to an external

display equipped with the HDMI interface (e.g. monitor or projector) to

better observe the waveform display clearly. At this time, you can also view

the waveforms on the LCD of the instrument.

3. USB DEVICE Interface

You can connect the instrument to the PC via this interface. Then you can

use the PC software Ultra Scope to send the SCPI commands, the

user-defined programming, or Web Control to control the instrument.

4. LAN Interface

Connect the instrument to network via this interface. The instrument is in

compliance with the standards specified in LXI Device Specification 2011. It

can be used to set up a test system.

When you access to the Internet, you can use the Web Control or PC

software Ultra Scope to send the SCPI commands or use the user-defined

programming to control the instrument. When update is available, you can

perform online upgrading for the system software of the instrument via the

LAN interface. After it is connected to the network, you can print the

waveform displayed on the screen when you use the network printer.