MSO/DS2000A Series Digital Oscilloscope Bandwidth up to 300 MHz, standard with 50 Ω input 2 analog channels, 16 digital channels (MSO) Lower noise floor, wider vertical range: 500 uV/div~10 V/div Real-time Sample Rate: analog channel up to 2 GSa/s, digital channel up to 1 GSa/s (MSO) Memory Depth: analog channel up to 14 Mpts (standard)/56 Mpts (optional), digital channel up to 14 Mpts (standard)/28 Mpts (optional) Innovative "UltraVision" technology Waveform capture rate up to 50,000 wfms/s Up to 256 leve
MSO/DS2000A Series Digital Oscilloscope RUN/STOP/SINGLE Built-in source control key (MSO/DS2000A-S) Waveform record&playback 16 digital channels (MSO) Independent control for each channel Decoding Product Dimensions: Width×Height×Depth = 361.6 mmx179.6 mmx130.8 mm Weight: 3.9 kg±0.
Wider vertical range (500 uV/div~10 V/div), lower noise floor, better for small signal capturing Built-in dual-channel 25 MHz source (MSO/DS2000A-S) UltraVision: deeper memory (analog channel up to 14 Mpts (standard)/56 Mpts (optional)) UltraVision: up to 50,000 wfms/s waveform capture rate UltraVision: real-time waveform record, playback and analysis functions UltraVision: multi-level intensity grading display (up to 256 levels) Serial bus trigger&decoding functions (RS232, I2C, SPI, CAN) Versatile
MSO2000A Series Mixed Signal Oscilloscope Besides the powerful functions of DS2000A, you could get more from MSO2000A with: 16 digital channels Sample rate of digital channel up to 1 GSa/s Memory depth of digital channel up to 28 Mpts Waveform capture rate of digital channel up to 50,000 wfms/s Hardware real-time waveform record and playback functions, up to 65,000 frames can be recorded Triggering and decoding across analog and digital channels Easy grouping and group operation of the digital channels Sup
RIGOL Probes Supported by MSO/DS2000A Series: RIGOL Passive Probes Model Number Type RIGOL Active & Current Probes Description Model Number Type Description Current Probe BW: DC to 300 kHz Max. input DC: ±100 A, AC P-P: 200 A, AC RMS: 70 A Compatibility: all RIGOL scopes. Current Probe RP1002C BW: DC to 1 MHz Max. input DC: ±70 A, AC P-P: 140 A, AC RMS: 50 A Compatibility: all RIGOL scopes. Current Probe RP1003C BW: DC to 50 MHz Max.
Specifications All the specifications are guaranteed except the parameters marked with "Typical" and the oscilloscope needs to operate for more than 30 minutes under the specified operation temperature.
Vertical Bandwidth (-3 dB) (50 Ω) MSO/DS2302A/2302A-S: DC to 300 MHz MSO/DS2202A/2202A-S: DC to 200 MHz MSO/DS2102A/2102A-S: DC to 100 MHz MSO/DS2072A/2072A-S: DC to 70 MHz Single Bandwidth (50 Ω) MSO/DS2302A/2302A-S: DC to 300 MHz MSO/DS2202A/2202A-S: DC to 200 MHz MSO/DS2102A/2102A-S: DC to 100 MHz MSO/DS2072A/2072A-S: DC to 70 MHz Vertical Resolution Analog channel: 8 bit Digital channel: 1 bit Vertical Scale[3] When the input impedance is 50 Ω: 500 μV/div to 1 V/div When the input impedance is 1
Trigger Trigger Level Range Internal: ±5 div from center of the screen EXT: ±4 V Trigger Mode Auto, Normal, Single Holdoff Range 100 ns to 10 s High Frequency Rejection[1] 75 kHz Low Frequency Rejection[1] 75 kHz Trigger Sensitivity[1] 1 div (below 10 mV or noise rejection is enabled) 0.
Data Type H, L Setup Time 2 ns to 1 s Hold Time 2 ns to 1 s RS232/UART Trigger Polarity Normal, Invert Trigger Condition Start, Error, Check Error, Data Baud 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, 230400 bps, 460800 bps, 921600 bps, 1 Mbps, User Data Bits 5 bit, 6 bit, 7 bit, 8 bit I2C Trigger Trigger Condition Start, Restart, Stop, Missing ACK, Address, Data, A&D Address Bits 7 bit, 8 bit, 10 bit Address Range 0 to 127, 0 to 255, 0 to 1023 Byte Length
Math Operation Waveform Operation A+B, A-B, A×B, A÷B, FFT, Digital Filter, Editable Advanced Operation, Logic Operation FFT Window Rectangle, Hanning, Blackman, Hamming FFT Display Split, Full Screen FFT Vertical Scale Vrms, dB Logic Operation AND, OR, NOT, XOR Math Function Intg, Diff, Lg, Exp, Sqrt, Sine, Cosine, Tangent Number of Buses for Decoding 2 Decoding Type Parallel (standard), RS232 (optional), I2C (optional), SPI (optional), CAN (optional) Display Display Type 8.
Arbitrary Waveform Frequency Amplitude DC Offset Modulation Frequency Range 100 mHz to 10 MHz Waveform Length 1 to 16k points Internal Storage Location 10 Accuracy 100 ppm (lower than 10 kHz) 50 ppm (higher than 10 kHz) Resolution 100 mHz or 4 bits, the larger of the two Output Range 20 mVpp to 5 Vpp, HighZ 10 mVpp to 2.5 Vpp, 50 Ω Resolution 100 μV or 3 bits, the larger of the two Accuracy 2% (1 kHz) Range ±2.5 V, HighZ ±1.
Ordering Information Model Standard Accessories Optional Accessories Description Order Number DS2072A (70 MHz, 2-analog channel oscilloscope) DS2072A DS2072A-S (70 MHz, 2-analog channel oscilloscope + 2-channel 25 MHz signal source) DS2072A-S MSO2072A (70 MHz, 2-analog channel + 16-digital channel MSO) MSO2072A MSO2072A-S (70 MHz, 2-analog channel + 16-digital channel MSO + 2-channel 25 MHz signal source) MSO2072A-S DS2102A (100 MHz, 2-analog channel oscilloscope) DS2102A DS2102A-S (100 MHz,
HEADQUARTER EUROPE NORTH AMERICA JAPAN RIGOL TECHNOLOGIES, INC. No.156,Cai He Village, Sha He Town, Chang Ping District, Beijing, 102206 P.R.China Tel:+86-10-80706688 Fax:+86-10-80720067 Electronic Measurement Instrument service and support email:EMD_support@rigol.com RIGOL TECHNOLOGIES GmbH Lindbergh str. 4 82178 Puchheim Germany Tel: 0049- 89/89418950 Email: info-europe@rigoltech.com RIGOL TECHNOLOGIES, USA INC.
