Datasheet

RIGOL
6
DC Offset Accuracy ±0.1 div ± 2 mV ± 1% offset value
Channel to Channel Isolation DC to maximum bandwidth: >40 dB
Vertical (Digital Channel)
Threshold 1 group with 8 channels adjustable threshold
LevelType TTL (1.4 V)
5.0 V CMOS (+2.5 V), 3.3 V CMOS (+1.65 V)
2.5 V CMOS (+1.25 V), 1.8 V CMOS (+0.9 V)
ECL (-1.3 V)
PECL (+3.7 V)
LVDS (+1.2 V)
0 V
User
Threshold range ±20.0 V, in 10 mV step
Threshold accuracy ±(100 mV + 3% of threshold setting)
Dynamic range ±10 V + threshold
Min Voltage Swing 500 mVpp
Input Impedance //101 KΩ
Probe Loading ≈ 8 pF
Vertical resolution 1 bit
Trigger
Trigger Level Range Internal ±5 div from center of the screen
EXT ±4 V
Trigger Mode Auto, Normal, Single
Holdoff Range 100 ns to 10 s
High Frequency Rejection
[1]
75 kHz
Low Frequency Rejection
[1]
75 kHz
Trigger Sensitivity 1 div (below 10 mV or noise rejection is enabled)
0.3 div (above 10 mV and noise rejection is disabled)
Edge Trigger
Edge Type Rising, Falling, Rising/Falling
Pulse Trigger
Pulse Condition Positive Pulse Width
(greater than, lower than, within specific interval)
Negative Pulse Width
(greater than, lower than, within specific interval)
Pulse Width Range 2 ns to 4 s
Runt Trigger
Pulse Condition None, >, <, <>
Pulse Polarity Positive, Negative
Pulse Range 2 ns to 4 s
Windows Trigger (Option)
Windows Type Rising, Falling, Rising/Falling
Trigger Position Enter, Exit, Time
Windows Time 16 ns to 4 s
Nth Edge Trigger (Option)
Edge Type Rising, Falling
Idle Time 16 ns to 4 s
Number of Edges 1 to 65535
Slope Trigger
Slope Condition Positive Slope (greater than, lower than, within specific interval)
Negative Slope (greater than, lower than, within specific interval)
Time Setting 10 ns to 1 s
Video Trigger (HDTV Option)
Signal Standard NTSC, PAL/SECAM, 480P, 576P (option), 720P, 1080P and
1080I (option)
Pattern Trigger
Pattern Setting H, L, X, Rising Edge, Falling Edge
Delay Trigger (Option)
Edge Type Rising, Falling
Delay Type >, <, <>, ><
Delay Time 2 ns to 4 s
TimeOut Trigger (Option)
Edge Type Rising, Falling, Rising/Falling
Timeout time 16 ns to 4 s
Duration Trigger (Option)
Pattern Setting H, L, X
Trigger Condition >, <, <>
Duration Time
2 ns to 4 s
Setup/Hold Trigger
Edge Type Rising, Falling
Data Type H, L
Setup Time 2 ns to 1 s
Hold Time 2 ns to 1 s
RS232/UART Trigger
Polarity Normal, Invert
Trigger Condition Start, Error, Check Error, Data
Baud 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps,
57600 bps, 115200 bps, User