Datasheet

Specications
All the specications are guaranteed except the parameters marked with “Typical” and the oscilloscope needs to operate for more than 30
minutes under the specied operation temperature.
5
RIGOL
Sample
Sample Mode Real-time Sample
Maximum Sample Rate
Analog channel
:
2 GSa/s (single-channel), 1 GSa/s (dual-channel)
Digital channel
: 1GSa/s(8CH), 500MSa/s(16CH)
Peak Detect
Analog channel
: 500 ps (single-channel), 1 ns (dual-channel)
Digital channel
: 1ns(8 CH), 2ns(16CH)
Averaging After all the channels nish N samples at the same time, N can be 2, 4, 8, 16, 32, 64, 128,
256, 512, 1024, 2048, 4096 or 8192.
High Resolution 12 bits of resolution when ≥5 μs/div @ 1 GSa/s (or ≥10 μs/div @ 500 MSa/s).
Minimum Detectable Pulse Width
Digital channel
: 5 ns
Memory Depth
Analog channel
:
single-channel: Auto, 14k pts, 140k pts, 1.4M pts, 14M pts and 56M pts (option) are available
dual-channel: Auto, 7k pts, 70k pts, 700k pts, 7M pts and 28M pts (option) are available
Digital channel
: 7Mpts(16 CH), 14Mpts(8 CH) std.;14Mpts(16 CH), 28Mpts(8 CH) opt.
Input
Number of Channels MSO2XX2A/2XX2A-S: 2-analog-channel + 16-digital-channel
DS2XX2A/2XX2A-S: 2-analog-channel
Input Coupling DC, AC or GND
Input Impedance
Analog channel
: (1 MΩ±1%) || (16 pF±3 pF) or 50 Ω±1.5%
Digital channel
: (101 kΩ±1%) || (9 pF±1 pF)
Probe Attenuation Coefcient
Analog channel
: 0.01X to 1000X, in 1-2-5 step
Maximum Input Voltage (1MΩ)
Analog channel
: CAT I 300 Vrms, CAT II 100 Vrms, Transient Overvoltage 1000 Vpk
with RP2200 10:1 probe: CAT II 300 Vrms
with RP3300A 10:1 probe: CAT II 300 Vrms
with RP3500A 10:1 probe: CAT II 300 Vrms
with RP5600A 10:1 probe: CAT II 300 Vrms
Digital channel
: CAT I 40 Vrms, transient overvoltage 800 Vpk
Horizontal
Time Base Scale MSO/DS2302A/2302A-S: 1 ns/div to 1.000 ks/div
MSO/DS2202A/2202A-S: 2.000 ns/div to 1.000 ks/div
MSO/DS2102A/2102A-S/2072A/2072A-S:
5.000 ns/div to 1.000 ks/div
Channel-to-Channel Skew 1 ns (typical), 2 ns (maximum)
Time-base Range 1 ns –1000 s
Maximum Record Length 14 Mpts per channel
Time Base Accuracy
[1]
≤ ±25 ppm
Time Base Drift ≤ ±5 ppm/year
Delay Range negative delay: ≥1 screen width
positive delay: 1 s to 100,000 s
Time Base Mode Y-T, X-Y, Roll
Number of X-Ys 1 path
Waveform Capture Rate
[2]
50,000 wfms/s (dots display)
Vertical
Bandwidth (-3dB) MSO/DS2302A/2302A-S：DC 至 300 MHz
MSO/DS2202A/2202A-S：DC 至 200 MHz
MSO/DS2102A/2102A-S：DC 至 100 MHz
MSO/DS2072A/2072A-S：DC 至 70 MHz
Single Bandwidth MSO/DS2302A/2302A-S：DC 至 300 MHz
MSO/DS2202A/2202A-S：DC 至 200 MHz
MSO/DS2102A/2102A-S：DC 至 100 MHz
MSO/DS2072A/2072A-S：DC 至 70 MHz
Vertical Resolution
Analog channel
: 8 bits
Digital channel
: 1 bit
Vertical Scale 500 μV/div to 1 V/div（50 Ω）
500 μV/div to 10 V/div（1 MΩ）
Offset Range 500 μV /div to 50 mV/div：±2 V
51 mV/div to 200 mV/div：±10 V
205 mV/div to 2 V/div：±50 V
2.05 V/div to 10 V/div：±100 V
Bandwidth Limit
[1]
MSO/DS2302A/2302A-S/2202A/2202A-S : 20 MHz/100 MHz
MSO/DS2102A/2102A-S/2072A/2072A-S : 20 MHz
Low Frequency Response
(AC Coupling -3dB)
≤ 5 Hz (on BNC)
Calculated Rise Time
[1]
MSO/DS2302A/2302A-S：1.2ns
MSO/DS2202A/2202A-S：1.8 ns
MSO/DS2102A/2102A-S：3.5 ns
MSO/DS2072A/2072A-S：5 ns
DC Gain Accuracy ±2% full scale