User Manual
Table Of Contents
- Guaranty and Declaration
- Safety Requirement
- MSO2000A/DS2000A Series Overview
- Document Overview
- Chapter 1 Quick Start
- Chapter 2 To Set the Vertical System
- Chapter 3 To Set the Horizontal System
- Chapter 4 To Set the Sample System
- Chapter 5 To Trigger the Oscilloscope
- Trigger Source
- Trigger Mode
- Trigger Coupling
- Trigger Holdoff
- Noise Rejection
- Trigger Type
- Edge Trigger
- Pulse Trigger
- Runt Trigger
- Windows Trigger (Option)
- Nth Edge Trigger (Option)
- Slope Trigger
- Video Trigger (HDTV Option)
- Pattern Trigger
- Delay Trigger (Option)
- TimeOut Trigger (Option)
- Duration Trigger (Option)
- Setup/Hold Trigger
- RS232 Trigger
- I2C Trigger
- SPI Trigger
- USB Trigger (Option)
- CAN Trigger (Option)
- Trigger Output Connector
- Chapter 6 MATH and Measurements
- Chapter 7 Digital Channel
- Chapter 8 Protocol Decoding
- Chapter 9 Reference Waveform
- Chapter 10 Pass/Fail Test
- Chapter 11 Waveform Record
- Chapter 12 Display Control
- Chapter 13 Signal Source
- Chapter 14 Store and Recall
- Chapter 15 System Function Setting
- Chapter 16 Remote Control
- Chapter 17 Troubleshooting
- Chapter 18 Specifications
- Chapter 19 Appendix
- Index
Chapter 14 Store and Recall RIGOL
MSO2000A/DS2000A User’s Guide 14-19
Math Operation Setting (MATH->Operate)
Operate OFF
A+B
Source A CH1
Source B CH1
Invert OFF
Vertical Scale 2 V
A-B
Source A CH1
Source B CH1
Invert OFF
Vertical Scale 2 V
A×B
Source A CH1
Source B CH1
Vertical Invert OFF
Scale 2 U
A÷B
Source A CH1
Source B CH1
Invert OFF
Vertical Scale 2 U
FFT
Source CH1
Window Function Rectangle
Display Split
Scale dB
Vertical Scale 20 dBV
Horizontal Scale 1.25 MHz/div
Sample Rate 50 MSa/s
Anti-Aliasing OFF
Logic Operation
Log.Formula AND
Source A CH1
Source B CH1
Invert OFF