User Manual
Table Of Contents
- Guaranty and Declaration
- Safety Requirement
- MSO2000A/DS2000A Series Overview
- Document Overview
- Chapter 1 Quick Start
- Chapter 2 To Set the Vertical System
- Chapter 3 To Set the Horizontal System
- Chapter 4 To Set the Sample System
- Chapter 5 To Trigger the Oscilloscope
- Trigger Source
- Trigger Mode
- Trigger Coupling
- Trigger Holdoff
- Noise Rejection
- Trigger Type
- Edge Trigger
- Pulse Trigger
- Runt Trigger
- Windows Trigger (Option)
- Nth Edge Trigger (Option)
- Slope Trigger
- Video Trigger (HDTV Option)
- Pattern Trigger
- Delay Trigger (Option)
- TimeOut Trigger (Option)
- Duration Trigger (Option)
- Setup/Hold Trigger
- RS232 Trigger
- I2C Trigger
- SPI Trigger
- USB Trigger (Option)
- CAN Trigger (Option)
- Trigger Output Connector
- Chapter 6 MATH and Measurements
- Chapter 7 Digital Channel
- Chapter 8 Protocol Decoding
- Chapter 9 Reference Waveform
- Chapter 10 Pass/Fail Test
- Chapter 11 Waveform Record
- Chapter 12 Display Control
- Chapter 13 Signal Source
- Chapter 14 Store and Recall
- Chapter 15 System Function Setting
- Chapter 16 Remote Control
- Chapter 17 Troubleshooting
- Chapter 18 Specifications
- Chapter 19 Appendix
- Index
RIGOL Chapter 14 Store and Recall
14-16 MSO2000A/DS2000A User’s Guide
Input Impedance 1 MΩ
Channel Invert OFF
Amplitude Scale Coarse
Channel Unit V
Acquisition Setting (Acquire)
Acquisition Mode Normal
Sampling Mode Real Time
Memory Depth Auto
Anti-Aliasing OFF
Trigger Setting (TRIGGER)
Trigger Level 0
Trigger Type Edge
Source CH1
Slope Rising Edge
Trigger Mode Auto
Trigger Coupling DC
Trigger Holdoff 100 ns
Noise Reject OFF
Display Setting (Display)
Display Type Vectors
Persistence Time Min
Waveform Intensity 50%
Screen Grid
Brightness 50%
Menu Display Infinite
Signal Source (Source)
[1]
Source 1 Switch OFF
Source 2 Switch OFF
Status Display OFF
Source 1 Setup/Source 2 Setup
Waveform Sine
Channel Switch OFF