User manual

ManualsBrandsRIGOL ManualsLaboratory Test EquipmentDigital 100 MHz 20-channel 500 null 3 null 8 Bit Digital storage (DSO), Mixed signal (MSO), Function g

131

132

133

134

135

136

137

138

139

140

RIGOL Chapter 2 Command System

2-116 MSO1000Z/DS1000Z Programming Guide

:MEASure:SOURce

Syntax :MEASure:SOURce <sour>

:MEASure:SOURce?

Description

Set or query the source of the current measurement parameter.

Parameter

Name

Type

Range

Default

<sour> Discrete

{D0|D1|D2|D3|D4|D5|D6|D7|D8|

D9|D10|D11|D12|D13|D14|D15|

CHANnel1|CHANnel2|CHANnel3|CHANnel4|MATH}

CHANnel1

Explanation  Analog channels CH1 to CH4 can be selected no matter wether they are currently

turned on. Note: When any of channels D0 to D7 is turned on, CH4 cannot be

selected; when any of channels D8 to D15 is selected, CH3 cannnot be selected.

 For digital channels D0 to D15, only channels currently turned on can be selected.

 This command is used to set the source for the measurement parameters (except

delay and phase). The delay and phase measurements requires two sources which

can be set by the

:MEASure:SETup:DSA

and

:MEASure:SETup:DSB, :MEASure:SETup:PSA and :MEASure:SETup:PSB

commands respectively.

Return

Format

The query returns D0, D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13, D14,

D15, CHAN1, CHAN2, CHAN3, CHAN4, or MATH.

Example :MEASure:SOURce CHANnel2 /*Set the parameter measurement source to CH2*/

:MEASure:SOURce? /*The query returns CHAN2*/

Command

:MEASure:ITEM

:MEASure:COUNter:SOURce

Syntax :MEASure:COUNter:SOURce <sour>

:MEASure:COUNter:SOURce?

Description Set or query the source of the frequency counter, or disable the frequency counter.