User`s guide

Chapter 2 Front Panel Operations RIGOL
M300 User’s Guide
2-51
Figure 2-18 MC3132/MC3232 Control Interface (Bank Joined)
If the channel currently selected is not added to the scan list and other channels of
the module are not added to the scan list, pressing OK can close the channel. At this
point, pressing OK again can open the channel. If the channel is added to the scan
list, pressing OK can close the channel and read the measurement result (before
closing this channel, the instrument opens the channel currently closed). Pressing
OK again can read the measurement result again.
1 Open
Disconnect the channel currently selected. The channel number of the channel
currently disconnected is displayed in gray, for example,
. If one or more
channels of the current module are added to the scan list, this operation is
invalid.
2 Close
Close the channel currently selected. The channel number of the channel
currently closed is displayed in green, for example,
. If one or more channels
of the current module are added to the scan list, this operation is invalid.
3 Read
Read the measurement value of the current channel. This operation is only
applicable to channels added to the scan list.
4 Card Reset
Initialize the status of each channel of the current module. If one or more
channels of the current module are added to the scan list, this operation is
invalid.