User`s guide

Chapter 2 Front Panel Operations RIGOL
M300 User’s Guide
2-41
it) and press Done to execute the channel copy.
You also can press Switch to fix the channel selected as the target channel after
entering the channel copy interface. At this point, the lower area is selected. Use the
left/right direction keys to select the desired source channel and press Done to
execute channel copy.
Tips:
1. When the channel selected is fixed as the source channel, multiple target
channels can be selected and are displayed in the lower area.
2. When the channel selected is fixed as the target channel, only one source
channel can be selected.
3. The Switch menu is gray and disabled if the scan list only has one channel.
Note: For channel copy, only copies between the same type of channels are allowed.