User`s guide

RIGOL Chapter 2 Front Panel Operations
2-14 M300 User’s Guide
Explanation:
If you want to configure the channel of the multiplexer (MC3132, MC3164,
MC3232 and MC3264), add it
to the scan list and use it for measurement,
you need to first insert and enable the DMM module (Utility DMM
“ON”) or connect an external digital multimeter.
2 Function
Use the up/down direction keys to select Function and the left/right direction
keys to select the desired measurement function.
If the current channel is the voltage channel of the multiplexer, the
measurement functions available include DCV, ACV, 2WR, 4WR (only supported
by the first 16 channels of MC3132 and MC3232 and the first 10 channels of
MC3120 and MC3324), FREQ, PERIOD, TEMP and SENSOR. If the channel is
current channel (only for MC3324), the measurement functions available include
DCI, ACV and SENSOR. After selecting the desired measurement function,
please configure the basic measurement parameters for the function selected by
referring to Measurement Parameter Configuration and press Next to
configure the scaling or alarm parameters.
If the current channel is the DIO channel of the multifunction module, Function
is fixed at “DIO”. Please refer to Digital Input
to set the basic parameters
and press Next to configure the alarm parameters.
If the current channel is the TOT channel of the multifunction module, Function
is fixed at “TOT”. Please refer to Totalizer
to set the basic parameters and
press Next to configure the alarm parameters.