User`s guide

Chapter 2 Front Panel Operations RIGOL
M300 User’s Guide
2-13
Measurement Configuration
The first step in the channel configuration guide: select the channel number, select
the measurement function of the specified channel and configure the basic
measurement parameters of the selected function.
Figure 2-4 Measurement Configuration
1 Channel Number
Select the desired channel number. Generally, the channel number is a 3-digit
number where the first digit (from the left) denotes the number of the
module slot and the other two digits denote the number of the channel.
SCC
The number of the module slot (from 1 to 5)
The number of the channel (from 01 to 64)
The channels available include all the channels of the multiplexer (S01 to
S32/S64/S24), the DIO (S01 to S04) and TOT (S05 to S08) channels of the
multifunction module.
After entering the channel configuration guide, Chan No. is selected by default.
At this point, you can use the left/right direction keys to modify the channel
number or the numeric keyboard to input the channel number.