User`s guide

Chapter 2 Front Panel Operations RIGOL
M300 User’s Guide
2-7
5 Search
When a great number of channels are added into the scan list, you can press
Page Dn  Search, use the numeric keyboard to input the desired channel
number and then press OK to quickly locate this channel. You can copy, modify
or delete the channel configuration located.
To Save the List
The M300 allows users to save the configured scan list in internal or external
memory as measurement configuration file.
Press Config  Save to enter the store and recall interface (the file type is
automatically set to “Measurement configuration”). Select the desired directory
according to the method introduced in “Store and Recall” and then press Save to
enter the filename input interface. Input the specified filename to save the current
scan list.
You can read the scan list stored as well as modify its configuration and save it again.
To Read the List
The M300 allows users to read the scan list stored. Press Config  Read to enter
the store and recall interface (the file type is set to “Measurement Configuration”
automatically). Select and read the desired file according to the method introduced
in “
Store and Recall”.
You can modify the configuration of the scan list read and save it again.