User`s guide

RIGOL Chapter 2 Front Panel Operations
2-6 M300 User’s Guide
To Edit the List
Press ConfigEdit to enter the scan list editing interface.
Figure 2-2 Scan List Editing Interface
1 New
Create a new channel configuration. Press this softkey to enter the channel
configuration guide. Finish all the configurations according to the introductions
in “Channel Configuration” and press Done to return to the scan list editing
interface.
2 Copy
Copy the channel configuration created to other channel or module. For details,
refer to the introduction in “Configuration Copy”.
3 Modify
Modify the channel configuration created. Select the desired channel using the
direction keys and press Modify to open the configuration guide of the
corresponding channel. At this point, you can modify the configuration of this
channel and after the modification is finished, press Done to return to the scan
list editing interface.
Note: the channel in Chan No. can only be modified to the channels in the
scan list.
4 Delete
Delete a channel configuration created. Select the channel to be deleted using
the direction keys and press Delete to delete the corresponding channel.