User`s guide

Chapter 1 Quick Guide RIGOL
M300 User’s Guide
1-21
Measurement Connections
Multiple signals to be measured are connected to the plug-in modules through the
external terminal blocks and then switched to the DMM module or external DMM.
M300 provides 7 kinds of terminal blocks. The models of the terminal blocks and
corresponding modules are listed in the table below. This section introduces how to
connect the signals to be measured through the external block.
Table 1-1 External Terminal Blocks
Terminal Block
Module
1.
M3TB20
MC3120
2.
M3TB32
MC3132, MC3232
3.
M3TB64
MC3164, MC3264
4.
M3TB24
MC3324
5.
M3TB48
MC3648
6.
M3TB16
MC3416
7.
M3TB34
MC3534
Note: for the MC3724, the signal can be connected to the SMB connectors on the
module directly. No terminal block is needed.
WARNING
Cut off all the power supplies before opening the terminal block or
removing the terminal block from the module.