User`s guide

RIGOL Chapter 1 Quick Guide
1-14 M300 User’s Guide
4 Switch the Input Mode
Press Ch/A/a to switch the input mode to Chinese, English uppercase or
English lowercase.
 Chinese: can input Chinese characters and number (from 0 to 9) and
is displayed in the “Input Mode Icon Area”.
 English uppercase: can input English uppercase letters (from A to Z) and
number (from 0 to 9) and
is displayed in the “Input Mode Icon Area”.
 English lowercase: can input English lowercase letters (from a to z) and
number (from 0 to 9) and
is displayed in the “Input Mode Icon Area”.
5 Switch the Cursor
Press Cursor to switch the cursor to select “Filename Input Area”, “Letter
Selecting Area” or “Chinese Character Selecting Area” (only available in Chinese
input mode).
 When “Filename Input Area” is selected, you can use left/right direction
keys to select desired letter to edit.
 When “Letter Selecting Area” is selected, use the direction keys to select
desired letter and press OK. At this point, letters in “Filename Input Area”
or “Chinese Character Selecting Area” varies.
 In Chinese input mode, when “Chinese Character Selecting Area” is selected,
you can use the up/down direction keys to open the previous or next page
of “Chinese Character Selecting Area” and use the numberic keyboard to
input the number corresponding to the Chinese character to input the
desired Chinese character.
6 Delete
Press this softkey to delete the letter selected by the cursor in “Filename Input
Area”.
7 OK
Press this softkey to use the letters displayed in “Filename Input Area” as the
filename.
8 Return
Press this softkey to cancel inputting filename and return to the previous menu.