User`s guide

RIGOL Chapter 2 Front Panel Operations
2-90 M300 User’s Guide
System Information
Press Utility  Info to view the model, serial number and version of the
instrument.
Detect
Press Utility  Detect to enter the interface as shown in the figure below. The 5
column diagrams represent the 5 slots. The corresponding slot number (such as
Slot1) and the model of the module inserted into the slot are displayed below and
above the column diagram respectively and the name of the module is displayed in
the middle of the column diagram. Use the left/right direction keys to select the
desired module (slot without module and slot with the DMM module cannot be
selected) and the module currently selected is displayed in blue.
Module Model Module Name Slot Number
图 2-1 检测界面
1 Self-test
Select the corresponding slot and press this softkey to test the module.
2 View
Press this softkey to view the information of the module currently selected,
including the function, model, serial number and version.
3 Re-test
If the module is inserted or removed when the instrument is running, select the
corresponding slot and press this softkey to test the module of this slot again to
acquire the latest status.