User`s guide

RIGOL Chapter 2 Front Panel Operations
2-74 M300 User’s Guide
system configuration and the measurement configuration.
4 Measurement Data
Store the current measurement data as a file with the suffix “.dat” or “.csv” into
the internal memory or external USB storage device.
Note: the file with the suffix “.csv” can only be stored in the USB storage
device.
Internal Storage
The internal C: disk holds 256 Mbytes storage space and can store four types of files,
including system configuration, measurement configuration and measurement data
(only “.dat” file).
External Storage
The D: disk can store four types of files, including system configuration,
measurement configuration, mirror configuration and measurement data (“.dat” or
“.csv” file), according to its capacity.
Before using the external storage, insert the USB storage device into the USB Host
interface at the front panel. When the instrument detects the USB storage device,
will be displayed in the screen status bar.
CAUTION
When executing operations in the D: disk storage area, do not remove the
USB storage device.
To Save File
When the current storage area can store the specified type of file, press Save to
enter the filename input interface as shown in
Figure 1-6. The length of the filename
cannot exceed 12 characters. Please refer to the introduction in “
To Input
Filename” to input the filename and press OK to finish the save operation.