User`s guide

RIGOL Chapter 2 Front Panel Operations
2-58 M300 User’s Guide
To Control MC3416
MC3416 is a 16-channel actuator (ACT-16 for short). This module contains 16
independent SPDT (single-pole and double-throw) switches. This module does not
connect to the DMM module and only provide access to the NC (Normally Closed),
NO (Normally Open) and COM (Common) contacts on each switch. It can be used to
control external devices.
01
...
NC
COM
Signals
to be
Switched
NO
NC
COM
NO
16
Terminal Blocks
: M
3TB
16
78
-Pin
Interface
H
L
01
H
L
16
.
.
.
Figure 2-26 MC3416 Schematic Diagram
The control interface of MC3416 is as shown in the figure below. Use the up/down
and left/right direction keys to select the desired channel. The channel currently
selected is highlighted, for example,
. You can perform various operations on the
channel currently selected (such as disconnect and close the channel).
Figure 2-27 MC3416 Control Interface