Specifications

ManualsBrandsRigol ManualsComputer equipmentM300 Series

100

Chapter 2 Command System RIGOL

M300 Programming Guide 2-77

MEASure:TEMPerature?

Syntax MEASure:TEMPerature?

{<probe_type>|DEF},{<type>|DEF}[,1[,{<resolution>|MIN|MAX|DEF}]],(@<scan_list>)

Description Configure the specified channels to the temperature measurement function, start a scan

and read the readings.

Parameters

Name

Type

Range

Default

<probe_type>

Discrete

{TCouple|THERmistor|RTD|FRTD}

<type> Discrete

TCouple

{B|E|J|K|N|R|S|T}

THERmistor

{2252|3000|5000|10000|30000}

5000

RTD

{85|89|91|92}

FRTD

{85|89|91|92}

<resolution> Numeric

Can receive any numeric value. This parameter is unessary

for the command. The instrument only receives the

parameter but does not respond to it.

<scan_list>

Scan

List

One or more channels (only for the multiplexer

channels), the rules are as follows:

(@101): channel 01 on the module in Slot1;

(@101:103): channel 01 through 03 on the

module in Slot1;

(@101:103,301): channel 01 through 03 on the

module in Slot1 and channel 01 on the module in

Slot3.

None

Explanation  This command is equivalent to the CONFigure:TEMPerature command followed by the

READ? command.

 For all the channels of MC3164 and MC3264, <probe_type> can not be set to FRTD

(4-wire RTD).

 If <probe_type> is specified as FRTD, channel n is paired with channel n+16

(MC3132 and MC3232, wherein the range of n is from 1 to 16) or n+10 (MC3324 and

MC3120, wherein the range of n is from 1 to 10) automatically. Channel n is used to

connect the source terminal of the DMM and channel n+16 or channel n+10 is used to

connect the sense terminal of the DMM. The paired channels cannot be configured.

 If the input signal is greater than can be measured on the selected range, the

instrument gives an overload indication: "OVERLOAD" from the front panel or

"±9.9E+37" from the remote interface.

 <scan_list> overwrites the current scan list.

Return

Format

The query returns the readings in scientific notation. Multiple return values are separated

by commas.

Example MEAS:TEMP? DEF,DEF,1,DEF,(@101)

The query returns +2.411291906E+01.

commands

CONFigure:TEMPerature

READ?