Specifications

RIGOL Chapter 2 Command System
2-72 M300 Programming Guide
100PLC
0.035ppm× <range>
200PLC
0.03ppm× <range> (MIN)
 If the input signal is greater than can be measured on the selected range, the
instrument gives an overload indication: "OVERLOAD" from the front panel or
"±9.9E+37" from the remote interface.
 <scan_list> overwrites the current scan list.
Return
Format
The query returns the readings in scientific notation. Multiple return values are separated
by commas.
Example MEAS:CURR:DC? AUTO,DEF,(@121:122)
The query returns +3.373913517E-01,+3.346332554E-01.
Related
commands
CONFigure:CURRent[:DC]
READ?