Specifications

Chapter 2 Command System RIGOL
M300 Programming Guide 2-67
LXI Command Subsystem
LXI:IDENtify[:STATE]
LXI:RESet
LXI:RESTart
LXI:IDENtify[:STATE]
Syntax LXI:IDENtify[:STATE] <state>
LXI:IDENtify[:STATE]?
Description
Turn the LXI identification indicator on the front panel display on or off.
Parameters
Name
Type
Range
Default
<state>
Bool
{OFF|0|ON|1}
None
Explanation This command is valid only when M300 has been connected to the network using a
LAN cable.
You can press
to turn off the LXI identification indicator.
The instrument turns off the LXI identification indicator after a Factory Reset (send
the
*RST command).
Return
Format
The query returns 0 (OFF) or 1 (ON).
Example
LXI:IDEN:STATE 1
LXI:IDEN:STATE?
The query returns 1.
Related
command
LXI Command Subsystem
LXI:RESet
Syntax
LXI:RESet
Description Reset the LAN settings to their default values.
The default values are as below
DHCP: ON
AutoIP: ON
ManualIP: OFF
LXI:RESTart
Syntax
LXI:RESTart
Description Restart the LAN with the current parameters.