Specifications
Chapter 2 Command System RIGOL
M300 Programming Guide 2-55
FORMat:READing:UNIT
Syntax FORMat:READing:UNIT <mode>
FORMat:READing:UNIT?
Description Disable or enable the measurement unit in the return redings of the scan result query
commands (such as the
READ? command, the R? command and the FETCh? command).
Parameters
Name
Type
Range
Default
<mode>
Bool
{OFF|0|ON|1}
OFF
Explanation The setting applies to all the readings aquired in the scan. You cannot set the reading
format on a per-channel basis.
This command operates in conjunction with the other
FORMat Command Subsystem
commands (they are not mutually exclusive).
This setting is stored in the volatile memory (refer to
Appendix D: Volatile memory)
and will be disabled (OFF) when the power is turned off or after a Factory Reset (the
*RST command).
Return
Format
The query returns 0 (OFF) or 1 (ON).
Example
FORM:READ:UNIT ON
FORM:READ:UNIT?
The query returns 1.
Related
commands
FORMat:READing:CHANnel
R?
READ?
FETCh?