Specifications

RIGOL
M300 Programming Guide III
noted, “Multiplexer channels” refers to the MC3120, MC3132, MC3164, MC3232, MC3264 and MC3324
channels.
Model
Name
Explanation
MC3065
DMM Module
Measure signals under test and perform statistical calculations
on the measurement results.
MC3120
20-Channel
Multiplexer
Support DCV, ACV, 2WR, 4WR, TEMP, FREQ, PERIOD and
SENSOR measurement functions; support scaling and alarm
functions.
MC3132
32-Channel
Multiplexer
Support DCV, ACV, 2WR, 4WR, TEMP, FREQ, PERIOD and
SENSOR measurement functions; support scaling and alarm
functions.
MC3164
64-Single-Ended
Multiplexer
Support DCV, ACV, 2WR, TEMP, FREQ, PERIOD and SENSOR
measurement functions; support scaling and alarm functions.
MC3232
32-Channel Reed
Multiplexer
Support DCV, ACV, 2WR, 4WR, TEMP, FREQ, PERIOD and
SENSOR measurement functions; support scaling and alarm
functions.
MC3264
64-Single-Ended
Reed Multiplexer
Support DCV, ACV, 2WR, TEMP, FREQ, PERIOD and SENSOR
measurement functions; support scaling and alarm functions.
MC3324
24-Channel
Multiplexer
Support DCV, ACV, DCI, ACI, 2WR, 4WR, TEMP, FREQ, PERIOD
and SENSOR measurement functions; support scaling and
alarm functions.
MC3416
16-Channel Actuator
Switch signal to the device under test or actuate external
devices.
MC3534
Multifunction Module
Channel 1 to Channel 4 are the DIO (Digital Input/Output)
channels; Channel 5 to Channel 8 are the TOT (Totalizer)
channels; Channel 9 to Channel 12 are the DAC
(Digital-to-Analog Converter) channels.
MC3648
4×8 Matrix Switch
Connect multiple devices to multiple channels on the device
under test.
MC3724
Dual 4-Channel RF
Multiplexers
Consist of two independent 4-to-1 multiplexers and can switch
high frequency signal or pulse signal.