Specifications

Chapter 3 Application Examples RIGOL
M300 Programming Guide 3-1
Chapter 3 Application Examples
This chapter provides some application examples of the SCPI commands. A series of SCPI commands are
combined to realize the main functions of the Data Acquisition/Switch System.
Note:
1 Before using the examples in this chapter, please select the desired communication interface (USB,
LAN, RS232 or GPIB) and make correct connections (refer to the introductions in
To Build Remote
Communication). Besides, you have to install Ultra Sigma or other PC software for sending commands
on your PC.
2 The content enclosed in “/*” and “*/” after each command is annotation for easier understanding and
is not a part of the command.
Main topics of this chapter:
 Scan List Configuration
 Monitor
 Store and Recall
 Copy
 To Output
 To Output Analog Voltage