Specifications

Chapter 2 Command System RIGOL
M300 Programming Guide 2-217
SYSTem:REMote
Syntax
SYSTem:REMote
Description
Place the instrument in the remote mode.
Explanation
In the remote mode, all the keys (except
, and ) on the front panel are
disabled.
Example
SYST:REM
Related
commands
SYSTem:LOCal
SYSTem:RWLock
SYSTem:RWLock
Syntax
SYSTem:RWLock
Description
Place the instrument in the remote locked mode.
Explanation
In the locked mode, all the keys (except
) on the front panel are disabled. You can
press and hold or send the SYSTem:LOCal command to unlock the instrument.
Example
SYST:RWL
Related
commands
SYSTem:LOCal
SYSTem:REMote
SYSTem:SECurity[:IMMediate]
Syntax
SYSTem:SECurity[:IMMediate]
Description Clear all the data (except the MAC address, calibration parameters and serial number) in
the memory. This command usually restore the instrument to the initial state.
Explanation  This command restore the instrument to the factory settings (refer to the *RST
command).
 All the I/O parameters (such as the IP address) are returned to their factory settings.
 This command will not clear an attached USB storage device.
 The command clears and sanitizes all user files on the internal file system.
Example
SYST:SEC
Related
command
*RST
SYSTem:SERIal?
Syntax
SYSTem:SERIal?
Description
Query the serial number of M300.
Return
Format
The query returns the serial number in the form of "M300XXXXXXXXX".
Example
SYSTem:SERIal?
The query returns M300123123123.
Related
command
SYSTem Command Subsystem