Specifications

Chapter 2 Command System RIGOL
M300 Programming Guide 2-209
SYSTem:COMMunicate:LAN:UPDate
Syntax
SYSTem:COMMunicate:LAN:UPDate
Description Update the LAN parameters. Disconnect all the LAN and Web connections and restart the
LAN interface with the current LAN parameters.
Explanation  Executing this command updates the settings of the following commands.
SYSTem:COMMunicate:LAN:AUTOip
SYSTem:COMMunicate:LAN:DHCP
SYSTem:COMMunicate:LAN:MANUip
SYSTem:COMMunicate:LAN:DNS
SYSTem:COMMunicate:LAN:GATEway
SYSTem:COMMunicate:LAN:IPADdress
SYSTem:COMMunicate:LAN:SMASk
 When the LAN parameters set are invalid, the LAN cannot be connected normally
when this command is sent.
Related
commands
SYSTem:COMMunicate:LAN:DHCP
SYSTem:COMMunicate:LAN:AUTOip
SYSTem:COMMunicate:LAN:MANUip
SYSTem:COMMunicate:LAN:DNS
SYSTem:COMMunicate:LAN:GATEway
SYSTem:COMMunicate:LAN:IPADdress
SYSTem:COMMunicate:LAN:SMASk
SYSTem:COMMunicate:RS232:BAUD
Syntax SYSTem:COMMunicate:RS232:BAUD {4800|9600|19200|38400|57600|115200}
SYSTem:COMMunicate:RS232:BAUD?
Description
Set or query the baud rate of the RS232 interface and the unit is Baud.
Parameters
Name Type Range Default
{4800|9600|19200|
38400|57600|115200}
Discrete
4800|9600|19200|
38400|57600|115200
None
Explanation The baud rate of the RS232 interface is stored in the non-volatile memory (refer to
Appendix C: Non-volatile Memory) and does not change when the power has been off, after
a Factory Reset (send the
*RST command) or after an Instrument Preset (send the
SYSTem:PRESet command).
Return
Format
The query returns the current baud rate, for example, 19200.
Example
SYST:COMM:RS232:BAUD 19200
SYST:COMM:RS232:BAUD?
The query returns 19200.
Related
commands
SYSTem:COMMunicate:RS232:FLOWcontrol
SYSTem:COMMunicate:RS232:PARIty
SYSTem:COMMunicate:RS232:PRINt:STATe